SOLID PLASTIC
All solid plastic material is warranted against delimitation, breakage, and corrosion from the date of final completion when properly maintained. If material is deemed defective during this period, then it shall be replaced free of charge. Warranty is for material only and does not include installation errors, improper usage, or vandalism. No credits shall be issued for labor charges associated with replacing parts covered under this warranty.
Materials are shipped with a clear protective coating that is to be removed after installation is completed. In some cases, a slight residue may remain on the material after the peel coat is removed. We suggest cleaning all surfaces with water and mild liquid soap. For removal of tougher residue, a mild solvent such as mineral spirits may be used.
A standard cleaning should be performed on a regular basis with a soft wet cloth. All parts should be wiped down and dried. Never use abrasive pads or abrasive cleaners, as these will void any warranty and may damage the material. For graffiti removal, a standard commercial graffiti remover may be used (be sure to test a small area first to ensure the remover does not damage the material). For removal of small scratches, use the blunt end of a screwdriver and work the scratched material back into the damaged area.